Chip QuikSMD291AX Solder Paste no clean 63Sn/37Pb in 5cc syringe 15g
Thumbnail 1Thumbnail 2

Chip QuikSMD291AX Solder Paste no clean 63Sn/37Pb in 5cc syringe 15g

4.7/5
Product ID: 36353609
Secure Transaction
💉5cc Syringe
💧No Clean Formula
🔧Leaded Solder

Description

Solder with Confidence! 🔥

  • MADE IN THE USA - Proudly manufactured to high standards.
  • LIGHTWEIGHT DESIGN - Weighs only 0.01 ounces for effortless handling.
  • RELIABLE PERFORMANCE - No clean formula ensures a hassle-free finish.
  • PRECISION APPLICATION - Designed for meticulous soldering tasks.
  • USER FRIENDLY PACKAGING - Convenient 5cc syringe for easy dispensing.

The Chip Quik SMD291AX Solder Paste is a high-quality, leaded solder solution packaged in a user-friendly 5cc syringe. Its no clean formula ensures a clean finish, making it ideal for both professional and DIY projects. Weighing just 0.01 ounces, this solder paste is designed for precision and ease of use, proudly made in the USA.

Specifications

ManufacturerChip Quik®
Part NumberSMD291AX
Item Weight0.01 ounces
Package Dimensions4 x 2.3 x 0.8 inches
Country of OriginUSA
Item model numberSMD291AX
Is Discontinued By ManufacturerNo
MaterialMetal
Item Package Quantity1
Batteries Included?No
Batteries Required?No

Have a Question? See What Others Asked

What is the ratio of lead? And what is the suggested melt temperature?
Where do i purchase smaller tips for this?
Is this used like typical coiled electronics solder, but with more control of where it goes? Just touch with iron to heat?
What is the inner diameter of the dispensing tip?

Reviews

4.7

All from verified purchases

R**N

Worked Well

I accidentally bumped the batter connector off of an iPod Classic, and could not get the pads properly soldered with a normal spool of solder and looked into alternatives. It has been well over a decade that I had to solder some SMDs, so I forgot about liquid solder/solder paste and after seeing a couple Youtube videos using it I figured it is much cheaper than replacing the logic board, so if it doesn't work, no big deal.I was able to clean off the pads and put a drop of paste on all three pads and easily solder it back down with a wide tip. Since I didn't have good precision tweezers, I had a small bridge between two pins, which I was able to eventually get cleaned up. By no means meant as a problem with the paste, but just be careful not to use too much. :)

E**X

Excelente producto

Excelente estaño al ensayar , bien empacado , solo deben revisar que solo es 15gramos no dejarse guiar visualmente

K**R

Good stuff (TM)

I've tried buying larger syringes, and even a container of this stuff. But, I don't use it enough to justify the larger containers. This is a good SMD paste in a container that's right-sized for my needs.

J**Y

Good solder

Good solder for the price of solder paste is what you’re looking for. There are definitely many choices out there for this application I can say this solder worked well for me and I can recommend it. Giving 4 stars cause I’m not sure if it’s the best, but I know that it works well for me.

M**S

It works as you would expect

As the old saying goes, "a little goes a long way". I practiced soldering using an old SMD based VGA card, removing components, solder wicking the pads, applying this paste, setting the component in place and heating it with my hot air workstation. It's satisfying to see the grey pasted suddenly flash into a silvery mercury--like liquid, and seeing it pull into the pads to form a perfect solder joint. Just a tiny pin dot of the stuff on each solder pad is all you need. Any more than that and you'll need to wick away the excess as it forms solder bridges. After I made several successful chip replacements on the test board, I tackled my expensive audio analyzer relay replacement. This paste made short work of it. Highly recommended.

D**O

Worked Very Well

I have never soldered any SMD components and I've always had trouble with THT but decided to give SMD soldering a try. First resistor I soldered worked flawlessly. I ended up soldering 44 0805 resistors, 14 0805 capacitors, 6 3216 diodes, and 10 0603 resistors. They all worked perfectly using a hot air gun at 300C. Will definitely be using this product as I continue to practice SMD soldering and on my upcoming project. Will be testing it on ICs in the coming days.

P**E

Perfect

Perfect

S**S

Stencils Well

Might be a little too good but as the flux starts to dry out, it will still be good. Very fluid now but worked well on the first try. 10mil BGA pads to large 1210 pads. It all worked well. Cleaning up wasn't bad at all. We had some Kester that had a ton of the white film that was hard to clean up. This is our new go to. SRA was but they have shipping issues now. I was concerned about the T3 as T5 was better for the small pads.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
€ 27.14

Duties & taxes incl.

GERMANYstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

Chip Quiksmd291ax Solder Paste No Clean 63sn 37pb In 5cc | Desertcart GERMANY