Yecaye 304in Cord Hider, One-Cord Cable Concealer Kit, PVC Wire Covers for Cords on Wall, Paintable Cable Raceway Management, Max for 2 Small Cords for Home Office, 18 x L16.9in W0.59in H0.4in

Overall, I'd recommend this kit as it is well made, does the job and can cover a lot of space. I could see, however, that the installation might be tedious for someone not accustomed to figuring things out and the directions are no help. For example, it's not clear which side is the base and which is the cover (the cover fits OVER the base as shown on the outside of the box). Also, each of the covers must be cut shorter than the base as they fit partially into the joint covers, so you'll have to cut each cover even if you're using full runs of the base. Be careful not to abut the bases too close to woodwork or inside corners or you may not be able to snap the cover over the base. Once it's all done, it looks neat and tidy. I'd definitely buy it again, but I have a lot left over from my first install, so that's pretty good value.

Wow! This worked Fantastic, and did what it said it does! Great product. Easy to use, & held all the wires I wanted in one unit (tight fit) instead of running two rows. I had 2 sets 18g red/blk jacketed plus 2 skinny sets jacketed red/blk speaker wires. You should ***pay Attention*** putting the correct part to the wall. One side (cover) has slight rounded edge & the backside has a straight flat edge. I didn't pay attn & some weren't lining up as smooth because I had put coverside to wall. No one would probably notice but it bugged me knowing it was wrong, lol, so I pulled off those pieces to redo. Which brings me to the double sided tape included, which is great & 'Strong - I didn't want hassle of using screws. ***Note IF you need to remove because of error, use a hairdryer on the plastic to warm up tape underneath to be able to pull off the wall, otherwise you might take part of wall.*** Thankfully I saw someone else mention this trick and worked like a charm! This does of course destroy the piece, but i had plenty extra & glad came with w/ 2 rolls of tape.

First impression is that it's an ok product. The package was short on some connectors and over on others, but that's not critical for my application. As I think others have said, the adhesive strips are NOT meant to be removed from the wall, unless you like looking at peeled off paint. The instructions are confusing at best. The pictures don't show needed detail in some cases. I'm going to contact the company and see if they can clarify some details for me. Note: be careful not to bend the channels and covers - they tend to warp fairly easily. I'm going to give it a 4, because it IS a good value for the price, and hopefully they can improve the instructions.

very easy to install! great in hiding wires

This product was perfect for covering the small speaker wires running over and around my fireplace. Pieces clipped and snapped together with ease. I painted mine with an eggshell “one coat” latex texture. I had to touch up a few spots that peeled off during the assembly, but overall the painting process was a breeze and I’m with how it turned out (by “I’m” I mean my wife). The adhesive tape is a bit tedious but not deal breaker. I’d 100% purchase this product again.

Decent solution for managing cords on the wall. The PVC wire covers are paintable, allowing for easy customization to match the décor. The dimensions are appropriate. However, it might not be the best fit for larger cord management needs. Laso I found it very difficult to cut. Overall, it's a practical product if you're looking to tidy up a few cords in a smaller space.

I purchased three of these kits to run two flat ethernet cables from a closet in my bedroom where my network is located. I was able to run the system along the baseboards and have it barely noticeable. I had to run over two different door frames in order to reach one location I needed, and across the ceiling to reach another location. Unfortunately as it's designed for 1 cable, there's no three way splitters included. Even though it can easily handle two flat ethernet cables. So in one T junction I had to leave the wires exposed. I also had to leave them exposed under the doorways as there's no clean way to implement that. The ethernet cable I purchased came with those small hooks that have a nail in them, and I was able to put both cables together with two of those under the doors very cleanly into the next wire covers.The adhesive is very plentiful as well, and some of the best Two faced tape I've ever worked with to take off the second sides piece. I was able to easily use my thumb nail to get the plastic off it and stick it to the wall.It did take a bit of work to get things lined up correctly, but I used the straight line pieces that came with the kit as spacers from the baseboards. Basically I would stick one on, get the next piece ready and then stick it in position. When I finished I had to go back through and take the covers off everything to put the cable in, but it seemed like the best way to ensure everything was lined up perfectly.I even did a small diagonal piece and the way the sections are made they can hide completely in the connector pieces. Very nice kit, especially for the price.

Worked out perfectly!! The double sided tape isn't coming off once stuck. Would highly recommend